Toshiba Canvio Connect II 2TB Portable Hard Drive

Toshiba Canvio Connect II 2TB Portable Hard Drive, Black(HDTC820XK3C1)

Toshiba Canvio Connect II 2TB Portable Hard Drive, Black(HDTC820XK3C1)

• Backup and restore just files and folders or a full system backup for disk recovery. Cloud-enabled backup option available. Backups can be scheduled to run automatically. Secure backed up content with password-protected data encryption.
• Access and share content from any device anywhere via the internet. Using the free download of PogoPlug PC software easily upload and download content from any device. Canvio Connect II is pocket-sized and easy to carry.
• Easy to set up and use with a simple and intuitive user interface. One USB connection for set up and power. Equipped with broad compatibility to store and access files from PC and Mac without reformatting. Includes Toshiba 2-Year Limited Warranty

Toshiba’s Canvio Connect II takes portable storage to the next level. With secure remote access, local and cloud backup and the ability to share and stream your content, the Toshiba Canvio Connect II is your all-in-one portable storage solution. Available in capacities of 500GB, 1TB, and 2TB, this amazingly full featured powerhouse will keep all your digital treasures safe and in one place – so you can upload, download and backup to and from your desktop or laptop, even from your mobile devices. Unlike other solutions, the Canvio Connect II makes it simple to back up not just files and folders, but your whole system-or customize your backups to your exact needs. Secure your backups with password protection. Or, store on the cloud for total assurance. Schedule automatic backups to run automatically and the Canvio Connect II will take care of the rest. Equipped with full system backup and recovery software, it’s a complete solution right at your fingertips.

List Price: $ 84.99

Price: $ 75.99

SkuBros VGA to Component Video Adapter, HD15 Female to 3 x RCA Male (RGB)

SkuBros VGA to Component Video Adapter, HD15 Female to 3 x RCA Male (RGB), 1 foot Not For Computer Use – Universal Grounded DVI USB HDMI Gender Ethernet Modem Converter Wall Plug Charger

• Converts: Converts from VGA Male Plug to RCA Component Video Male Plugs
• End 1: VGA Male Plug
• End 2: RCA Component Video Female Jacks
• Length: 1 foot
• Wire: 28 AWG

List Price: $ 30.19

Price: $ 21.24

1FT Component RGB 3 RCA Female To D-sub 15-Pin VGA Video Adapter Cable This component RGB video adapter cable runs through a D-sub 15-pin type VGA connector for projectors or other component video device using D-sub 15-pin interconnect for input/output. Constructed of three individually shielded miniature 75-ohm coax type cable with 3 RCA female on one end and standard d-sub 15-pin VGA male on the other end. Heavy-duty molded strain relief provides increased flexibility and durability for transmitting high resolution video signal through for operation. [Note]: Both of your video source device and the receiving destination end or display equipment need to be able to support component RGB/YUV type video signals in order to use this adapter cable. The 15-pin VGA end of this adapter cable remains carrying the same component RGB/YUV type video signal from input. For converting component RGB/YUV type video signals into VGA or RGBHV type for LCD monitor or projection display, you will need to use a converter such as our AV-4, AV-7 or AV-400 model. Bridges the connection gap between component RGB and 15-pin VGA connector. Great for passing the RGB,RGsB,RsGsBs or component YPbPr video and sync signal through a D-sub 15-pin VGA connector. Integrated interference resistant ferrite cores for improved signal isolation  and enhanced system electromagnetic compatibility. Individually shielded coax lines protect against harmful EMI/RFI. 75-ohm impedance matched RCA terminations minimize signal reflections. Quintuple coax connector for standard high definition 75 Ohm inputs. Heavy-duty molded strain relief provides increased flexibility and durability. Connectors RCA female x 3 D-sub 15-pin male x 1 Foil and braid shield for high-resolution images. Cable Length: 1 feet.

Display Port to HDMI

Display Port to HDMI

Display Port to HDMI adapter lets you connect an HDMI-enabled video display to a DisplayPort video source (e.g.DisplayPort video cards, etc.), eliminating the expense of having to upgrade your display for DisplayPort compatibility. This adapter supports display resolutions of up to 1920x1200 allowing you to take full advantage of HDMI video capability.

This Comsol Adaptor is perfect for use with any device with a Mini DisplayPort connector. You can use the adaptor to connect your device to a standard HDMI cable so you can connect to a monitor, projector or TV.

• The adaptor has a Mini DisplayPort male connector and an HDMI female connector so you can connect your computer to a projector, TV or monitor.
• The adaptor is 20 cm in length.
• It supports Full HD resolutions up to 1920 x 1200.
• The adaptor has a subtle white design.
• It can be used in extended or mirrored mode.

How to connect

How to connect your Macbook to your TV by www.shophde.com

Display connectors

Display connectors like HDMI, DisplayPort, VGA, and DVI can be confusing for even seasoned techies! What are the differences? Which one should I use?

Vote for my punishment: http://bit.ly/linuschoice

Check out Fractal Design's excellent products: http://www.fractal-design.com/

USB-to-RS232

USB-to-RS232

The UC232A USB-to-RS232 serial port converter is the ideal accessory for laptop and desktop computers that do not have a COM or DB9 serial port. Supporting both PC and Mac systems with baud rates up to 230 Kbps for rapid performance, it offers a convenient connectivity solution for industrial automation systems, scientific instruments, point of sale systems, and other specialized industrial and consumer applications. Read more

The Chipi-X10

The Chipi-X10  is the latest cost effective version of FTDI's USB to RS232 converter cable range. It also serves as an evaluation cable for the FT231X. It utilises the minimum number of components required for a basic USB - RS232 converter designed using the FT231XS. Using the FT231X chip combined with an RS232 level converter and a few capacitors. Chipi-X10 is CE and FCC approved and  is one of the simplest USB - RS232 solutions around.

Using a standard DB9 connector and powered from the USB port, the Chipi-X10 converter can be used with FTDI's VCP drivers to provide a COM port on a PC which is capable of communication rates with RS232 devices, from 300 Baud up to 250kBaud.

This version of the Chipi - X10 is supplied with a sculpted matt white plastic enclosure fitted, which covers the electronics inside.  A 10cm USB cable is fitted.
The Chipi-X10 is fully RoHS compliant and is supplied loose packed in an anti-static bag. Read more rs232

easy substitution of USB for RS-232

An easy substitution of USB for RS-232 Let us solve the next task: Given a laptop without a com-port and a plane with a com-port. We need to connect these. We can use a USB to COM transition adapter in the form of a memory stick, then find an appropriate cable and carry them along all the time... not the best option. Another way to solve the problem forever in 15 minutes is using a standard USB cable for connection. What can help us is DB9-USB-F and DB9-USB-M modules created by FTDI company for direct substitution of slots with an incircuit USB socket for the existing DB9 slots (both plugs and sockets) with the purpose of connection according to RS232. The modules substitute (slot to slot) DB9 plugs and sockets for connection according to RS232 through a mini-USB B slot. The main point is that the device printing plate with the DB9 RS232 slot does not need any modification - it is enough to substitute an appropriate DB9-USB module for a D-type slot DB9 plug is to be substituted for with a DB9-USB-M plug, and a socket - with a DB9-USB-F socket. The modules have inside all electronics necessary to make transformations between USB and RS232 - a USB-Serial bridge FT232R microcircuit chip and level shift systems. RS232 signals, including modem service signals, can be transmitted at a speed of up to 1 Mbaud. DB9-USB needs USB device drivers available at www.ftdichip.com that enable the system to see DB9-USB as a virtual COM-port. This allows the existing software to exchange data through DB9-USB-RS232 as an ordinary peripheral RS232 device. The module is powered from the USB port and can function at temperatures from -40°C to +85°C. Now you can easily substitute USB for a COM-port your old device, thus providing it with a new life and enabling connection to a laptop. All you need is half hour of spare time, a solderer and an F or M DB9-USB module.